Today, the editor will analyze and introduce the safety operation deviation of the slitting machine.
Splitting machine blade cutting cardboard tail deflection:
1. The adjustment of the feeding positioning baffle for the slitting machine blade is not applicable;
2. The cutting blade is too dull and has a different linear speed than other cutting tools;
3. Improper adjustment of the blade guide wheel of the slitting machine;
4. The paper feeding of the slitting machine blade is not appropriate.
Burrs on the blades of the slitting machine:
1. The blade of the slitting machine has been passivated and should be polished;
2. The overlap between the slitting machine blade and the groove is too shallow;
3. The groove of the cutting machine blade is rolled into the paper edge and paper fuzz, and should be completely cleaned before starting;
4. The slot gap of the slitting machine blade is too large, generally not greater than 2.5mm.
The indentation line of the slitting machine blade is prone to breakage:
1. Low quality of raw paper;
2. The pressure pipeline is too deep.
The indentation line of the cutting machine blade is not straight:
1. The pressure line of the cutting machine blade is too shallow, and the folding line is uneven, which affects the appearance of the box;
2. The paper feeding of the slitting machine blade deviates; 3. The upper and lower pressure coils of the slitting machine blade are not adjusted.
Cutting machine blades do not cut edges vertically:
1. The viewpoint of the slitting machine blade is incorrect;
2. The blade of the slitting machine is not in the center of the groove;
3. Blade deflection of the slitting machine.